Stainless steel housing, explosion-proof ATEX approved: II 2 GEExm II T3
Range of 0.01" (0.25 mm) typical clearance
The Shimpo 3070-XP12010 is specifically engineered for use in the oil and petrochemical industries. This stainless steel sensor is completely sealed and explosion-proof. Low impedance allows for transistor circuit input. When mated with conduit, it provides positive protection against damage due to water, high humidity, oil, dirt, or corrosive liquids. ATEX listed for II 2 GEExm II T3. Explosion proof for gas, vapor, and liquid
Features
- Sine wave output from change in magnetic to non-magnetic
- Change in voltage proportional to magnetic flux intensity over time
- Range of 0.01" (0.25 mm) typical clearance
- 10' (3 m) cable
- Stainless steel housing, explosion-proof ATEX approved: II 2 GEExm II T3
Specifications
| Output Voltage | 60 VPP MIN. |
| Coil Resistance | 170 210 OHM@ |
| Output Inductance | 80 mH TYP |
| Dielectric | 500V RMS @ 60 Hz |
| Leakage Resistance | 100 MEGAOHMS MIN. |
| Temp Spec. | - 65 to +200 Deg. F |
Downloads
