![Shimpo SE-G2 Proximity Sensor Shimpo SE-G2 Proximity Sensor](http://www.abq-tachometer.com/images/products/shimpo-se-g2-proximity-sensor.jpg)
8 kHz frequency
Square wave output
The Shimpo SE-G2 Proximity Sensor (formerly SE-G) is a solid state proximity switch designed for gear sensing. The SE-G2 gear sensor will provide a square wave signal output and indicate detection via LED indicator on rear of unit.Maximum switching frequency is 8 kHz with a maximum sensing distance of 1.0 mm, gear pitch must be between 25.4 (min) and 16.93 (max).
![line](http://www.abqindustrial.net/store/images/products/line.gif)
Features
![line](http://www.abqindustrial.net/store/images/products/line.gif)
- Square wave output
- 8 kHz frequency
- 18" (0.46 m) cable included
- 0.04" (1 mm) sensing distance
- LED indication
![line](http://www.abqindustrial.net/store/images/products/line.gif)
Specifications
![line](http://www.abqindustrial.net/store/images/products/line.gif)
Power (VCC) | + 8.5v 16 VDC |
Sink Current | 40 mA maximum |
Output Signal High Level | (VCC 1.1) 10% |
Output Signal Low Level | 0.4v or less |
Output Power | 50 mA |
Duty Cycle | 25 75% |
Output Impedance | 2.2 k |
Operating Temperature | -4 - 158 F (-20 - 70 C) |
![line](https://www.abqindustrial.net/store/images/products/line.gif)
Downloads
![line](https://www.abqindustrial.net/store/images/products/line.gif)